plastic-pipes-for-sewage

Plastic pipes for sewage, wastewater...

plastic pipes are lightweight, resistant to aggressive chemicals, easy to lay in the ground, are non-porous and heat resistant. It is used for a sewage and wastewater pipeline, rainwater drains, sewage collectors, outfalls, chimneys for waste gases ...

vertical-plastic-tanks

Vertical plastic tanks

Vertical plastic tanks are produced in volumes up to 80,000 l and the maximum diameter to Ø3000 mm. It is commonly used as a water tanks,but can also be used as oil tanks and fuel tanks , tanks for chemicals, etc.

horizontal-plastic-tanks-cisterns

Horizontal plastic tanks - cisterns

Horizontal plastic tank with capacity of up to 200,000 liters. Tanks may be above the ground and under the ground. Tanks are used for the storage of water, oil and other liquids, septic tanks, etc. Connections are installed on customer request.

plant-for-purification-of-waste-water

Treatment plant for waste water

Plant for treatment of wastewater. Bio pur is suitable for places away from the sewage network. It is successfully used in houses, cottages and entire smaller towns.

oil-separators-oil-derivatives-separators

Separators

Oil separator used for the purification of waste water from rain drains for all surfaces exposed to precipitation and a greater amount of sediment, such as roads, squares, parks, gas stations, auto repair shops, garages, industrial plants ...

plastic-packaging-holandez-plastic-crate

Packaging

Crates, plastic boxes for transport, collection and storage of products in agriculture. Capacity from 3 kilograms to 12 kilograms.

plastic-toilet-cistern-toilet-seat

Plastic toilet cistern and toilet seat

The toilet cistern and toilet seat are made from high of quality materials (PPH), have a modern design, practical, long-lasting and easy to maintain. Easy and quick installation.

technical-parts-from-thermoplastics-duroplastics-and-foam-plastics

Technical parts

"Krušik-plastika" already 40 years engaged in the processing of thermoplastic materials, polyurethane foams and thermosets resin on modern machines and contemporary technology. Many years of experience enables us to produce technical parts and consumer articles.

  • plastic-pipes

    Plastic pipes

    for waste water, sewage, ventilation, irrigation and drainage systems
  • Vertical-plastic-rezervoir

    Vertical rezervoirs

    volume up to 80,000 liters of water, oil, chemicals ...
  • horizontal-rezervoirs-cisterns

    Horizontal fuel cisterns

    volume up to 200 000 liters of water, oil, chemicals ...
  • waste-water-treatment

    Waste water treatment

    Solves problems with sewage.
  • oil-separators-oil-derivat-derivatives-separators

    Grease and oil separation

    Separators for separation of oils, greases and petroleum products.
  • plastic-packaging-holandez

    Plastic packaging

    Crate from 3 to 12 kg for gathering, transport and storage of fruit.
  • plasticn-toilet-cistern

    The toilet cistern and toilet seat

    Plastic noiseless toilet cistern and toilet seat.
  • Technical-parts-from-thermoplastics-duroplastics-foam-plastics

    Technical parts

    Technical parts obtained by processing of thermoplastics, duroplastics and foam plastics.

Krušik-plastika a.d. Osečina                                                    Serbian

Company Krušik-plastika a.d. was established in 1975 by Krušik company from Valjevo as a  factory for processing of plastic mass.
Seat of the company and production plant is located in Osečina at the main road Valjevo – Loznica , 30km away from Valjevo and 130 km from Belgrade.

plasticne-cevi-rezervoari






At first the main activity was production of plastic parts for the needs of Krušik factories and later, with intensive development, new programmes and technologies were developed.
Right at the start of business operations (from 1978), a dominant position was secured for programme of production of pipes and tanks from polyethylene and polypropylene by means of extrusion spiral winding technology which is at the core of production today and which makes Krušik-plastika recognizable all over former Yugoslavia and beyond.

"Krušik-plastika" a.d. Osečina owns state of the art equipment, has several decades of experience and significant references for the following technologies:

• Extrusion spiral winding technology - pipes  - manholes - tanks, tubs - wastewater and gas treatment equipment (oil and grease separators, septic tanks, scrubbers, etc.)

• Injection thermoplast moulding - technical parts and elements - transport packages (carriers) - sanitary products (toilet cisterns and toilet seats)

• Duroplast pressing - technical parts and elements

• Processing of hard and soft polyurethane foams

OFFER OF AVAILABLE CAPACITIES:  In certain periods, we have free capacities with new machines for plastic injection (Krauss Maffei and Haitian).

We are willing to offer them for service moulding with the orderer’s tools. Please, contact us to check our currently available capacity. 

MACHINE
CLOSING FORCE (KN)
INJECTION CAPACITY  (g)
DISTANCE BETWEEN CAMBER SLIPS (mm)
Krauss Maffei KM 420/4300
4200
2084
800 x 800
Krauss Maffei KM 160/750
1600
357
520 x 520
Haitian HTF 240
2400
483
520 x 520
Haitian HTF 300
3000
770
660 x 600
Haitian MA 900
900
139
360 x 360
Haitian MA 3200/1700
3200
846
680 x 680
Haitian SA 3800/2950
3800
1693
730 x 730
Haitian SA 5300
5300
2272
840 x 830
Haitian SA 6000/5000
6000
3216
880 x 880
Haitian SA 8000/6800
8000
3359
1000 x 1000

 

 

Belišće
160t
2 pcs
100t
4 pcs
63t
3 pcs
Centrotehnica (TC S) Italy
65t
3 pcs
100t
3 pcs

Information:

 

 

 

 







 


Copyright © 2017 Krušik-plastika Osečina